Wooden Ships

International Yacht Brokers, Dartmouth UK

Tel/Fax +44 (0)1803 833899
info@woodenships.co.uk

Sign up to our newsletter
«Return to Sailing Yachts

Payne Clark Bermudan Ketch - SOLD

  • Designer: J Payne Clark
  • Builder: W.M. King and SOns
  • Year: 1925
  • Location Devon
  • Length on deck: 38'8"
  • Beam: 9'2"
  • Draft: 4'11"
  • Tonnage(TM): 12TM

£

REF: 11056

Full Specification

Wooden Ships Comments on this Payne Clark Bermudan Ketch

 

Designed by J. Payne Clark and built by W.M. King and sons of Burnham-on-Crouch in 1925 for a member of the Royal Thames Yacht Club.  She has a well documented history and gained herself a reputation as a fast passage making yacht and successful racing boat with a useful handicap and many race victories to her credit.  Her weight, long water line length and healthy ballast ratio mean she is exceptionally good at sea and has proved herself many times to be a comfortable and fast sailing yacht.

Presently in a long 25 year experienced ownership, she has been very well maintained and sympathetically updated so that she is now a first class classic yacht in full working order.

Survey, layout plans and other details available upon request.

Payne Clark Bermudan Ketch

Length on Deck                 38’8″

Length Overall                   41’8″

Beam                                    9’2″

Draft                                      4’11”

Displacement                    12 tonnes

Thames Tonnage             12TM

 

 

 

Construction

Hull

Planked in teak all fastened with copper rivets and roves to steam bent oak timbers, 1.5″ x 1″ at approximately 6″ centres.

Larger section frames in way of the mast.  Large section grown oak hanging knees and lodging knees, all copper rivet fastened.

Iron strap floors across the centreline with galvanised floor bolts and throat bolts.

Oak back bone with an external lead ballast keel of approximately 4 tons.  Phosphor bronze keel bolts, drawn in present ownership and found to be in excellent condition.

 

Decks and cockpit

Self draining cockpit is separated by a bridge deck carrying the main sheet horse and with the mizzen stepped through it, giving the helmsman his own space at the aft end.

Varnished teak cockpit coamings and thwarts.  Sliding companion hatch to the main cabin offset on the port side.

Yacht laid solid 25mm Iroko deck, caulked and payed in the traditional manner, and bronze ringshank nailed to the deck beams with a varnished teak king plank.  Deck laid in 1998.

Varnished teak cover boards with a high toe rail all round and a varnished rubbing strake outboard.

 

Superstructure

Coach roof design is typical of the period being quite narrow leaving wide side decks.  Varnished teak coamings with round bronze port holes and a sheathed plywood coah croof deck.

Varnished teak butterfly skylight on the centreline looks very pretty and allows plenty of light and ventilation into the cabin.

Varnished gas locker for twin calor gas bottles aft of the main mast

 

Rig 

Bermudan ketch rig on keel stepped spars.

Mainmast was built in 2001, hollow elliptical Douglas Fir spar tapered to the head.  Hollow rectangular section slab reefing boom.  Twin hollow rectangular spinnaker poles.

All rigging in 1×19 stainless steel, majority replaced in 2008.  Sloop headed rig with twin forestays, single cap shroud, single intermediate shroud and twin lowers over twin varnished spreaders.  Twin standing backstays.

Mizzen mast of similar construction to the main with slab reefing boom.  Stainless rigging on the mizzen, single spreaders with a single cap shroud and twin lower shrouds.  Dolphin strut acting as the forestay.  All mizzen rigging dates from 1992.

 

Sails

Mainsail                                                               2014 by Crusader sails

Mizzen                                                                 2016 by Crusader Sails

No.1 Genoa with hanks                                 2009 by Crusader Sails

No.2 Genoa with hanks                                 2008 by Crusader sails

Mizzen Staysail                                                 2016 by Crusader Sails

No.3 genoa

Spinnaker

Storm jib

Storm trysail

2nd Spinnaker with snuffer and other older sails also available.

 

Sail covers for main, mizzen and two genoas on the rails.

 

Winches

Main halyard and Genoa halyard winches on the main mast

Halyard winch on the mizzen mast

2 pairs of bronze sheet winches on the cockpit coamings

 

 

 

Machinery

Engine

Perkins Perama M35 34hp 3cyl diesel installed new in 1992.  Approximately 1400hrs running time.  Consumption of 3 litres/hr at 1800rpm.

Hurth HBW100 mechanical gearbox replaced new in 2007 with single lever Morse control.  Centreline stainless shaft to a fixed 3 blade 15″ bronze propeller set in an aperture in the rudder with a rope cutter.

Payne Clark Bermudan Ketch

Tanks

70lt galvanised main diesel tank gravity feeding a 50lt plastic lower sump tank.  In line water separators and fuel filters.

160lt plastic water tank on starboard side of engine

 

Batteries

2 x 105ah batteries, dedicated engine start battery and domestic battery.  Chargng from engine alternator (new in 2005)

Marlec 915 wind charger on the mizzen mast

 

 

Accommodation

Very nice largely original panelled interior joinery.  The layout is separated as many gentleman’s yachts of this period were, offering accommodation in the forepeak for a paid hand with a distinct and separate area aft of the saloon for galley.

 

Berths

7 berths including a port side quarter berth, two saloon settee berths and two pilot berths in the saloon, plus two single berths in the forepeak.

 

Saloon

Steps down from the companion hatch to the galley and chart desk area which has full headroom.  Galley to starboard, chart desk facing aft to port, folds out to lengthen the quarter berth.  Instruments above the desk so can be easily viewed.  Access to the engine is via small doors behind the companionway steps.

Bulkhead dividing the galley area off from the main saloon with a centreline panelled door into the saloon.

Port and starboard saloon settee berths with backs that fold up to make pilot berths when necessary.  Centreline dropleaf gimballed table works very well at sea.  Lots of storage cupboards and shelves with much nice original joinery.

Heads compartment at the forward end of the saloon to port.

Centreline door through another bulkhead into the forepeak with a good size single berth to port and the mast in the middle of the cabin.  To starboard is a tall locker with a seat forward, plus a second single berth that drops down when necessary.

 

Heads

Double folding door arrangement creates a spacious and privates heads compartment.  Blakes Lavac manual sea toilet discharges directly overboard.  Locker under the deckhead for storage.

 

Galley

L-shaped galley with a Plastimo 2000 gimballed 2 burner gas stove with oven and grill.  Twin stainless steel sinks pumped directly overboard.  Manually pumped fresh and salt water into the sinks.  Tiled work top with ample storage below.

 

 

 

Equipment

 

Navigation

 

At Navstation:

ICOM IC-M501 VHF set

ICOM DS-100 DSC set

Garmin 128 GPS

NASA Target Navtex Pro-Plus receiver

Raymarine ST60 multi instrument (linked to other ST60 instruments in cockpit)

 

In Cockpit panel:

Raymarine ST60 Speed

Raymarine ST60 Wind

Raymarine ST60 Depth

Raymarine ST60 Compass

Raymarine ST4000 tiller pilot (c/w 2 x tiller arms)

 

Safety

Jackstays

6 man life raft

2 x life buoys

 

Ground tackle

Simpson Lawrence anchor winch

35lb CQR with 25 fathoms of 3/8″ chain

45lb CQR with 1 fathom of chain and 2 x 25 fathoms of multiplait warp

15lb CQR kedge anchor

 

Other

Full winter cover with clear panels and zipped access doors.

Sprayhood (2009)

Boat hook

Avon dinghy with oars and pump

Yamaha 3hp 2 stroke outboard

Stereo with cockpit speakers

Disclaimer:

These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.

SOLD

«Return to Sailing Yachts